Every Monday we publish the most unbelievable stories of climbing stupidity submitted by our readers. See something unbelayvable? Email firstname.lastname@example.org and your story could be featured online or in print. For more Unbelayvable, check out the Unbelayvable Archives.
Descending a multipitch route in Eldorado Canyon, my partner and I noticed how the party in front of us rigged their rappel. I wasn't forthcoming enough to say anything, but could you set the record straight on the principle of redundancy?
—Tom, via email
LESSON: Huh. That's a new one. The anchor shown here is a Fixe Traditional Anchor. It consists of a single steel ring equalized between a bolt and a chain connected to a higher bolt. Depending on whether it's plated or stainless steel, the setup is UIAA certified to either 22 or 30kn. The idea with this anchor is that the ring is redundant between the two bolts. If one bolt fails, the other bolt will not be shock loaded. That only works if you run the rope through the ring. In the pictured rappel, if one bolt fails, the rope falls off the anchor. This setup could also add unnecessary wear to the rope by pinching it between anchor points or abrading it across metal edges like the bolt hanger.
The idea that you should run your rope through the ring and not over it seems so obvious that I wonder if the climbers even realize what they did. That's an even bigger issue. Rappelling accidents are serious. Always double check your setup and have your partner do the same. Accidents happen when these things feel routine and we become complacent.
We want to hear your Unbelayvable stories!
Email email@example.com and your story could be featured in a future edition online or in print. Unbelayvable photos are welcome, too.