Become a Member

Get access to more than 30 brands, premium video, exclusive content, events, mapping, and more.

Already have an account? Sign In

Become a Member

Get access to more than 30 brands, premium video, exclusive content, events, mapping, and more.

Already have an account? Sign In

Brands

Gear

What You Need to Know About Nuts

Racking them, placing them, threading them, stacking them, trusting them. Here's what you need to know about using nuts.

Get full access to Outside Learn, our online education hub featuring in-depth fitness, nutrition, and adventure courses and more than 2,000 instructional videos when you sign up for Outside+ Sign up for Outside+ today.

This article originally appeared in our print magazine in 2013.

When many people start trad climbing, cams become their new best friend. They’re easy to use and contract to fit a variety of crack sizes. But don’t underestimate the benefits of their counterpart: the nut.

Nuts are passive protection devices, meaning that their holding power comes from their wedge shapes, cleverly placed in natural slots and constrictions (as opposed to cams, which actively expand under load to grip the rock). With no moving parts (this is what makes them “passive”), nuts are inexpensive, lightweight, sturdy, and versatile since they can fit a variety of spots because they can be positioned in four different orientations. Indeed, thousands of nut-only first ascents were completed before cams were even invented. Here’s a rundown of how to use these amazing tools.

Section divider

Part I: An introduction to nutcraft

A typical set of nuts, also called wires or chocks, consists of 10 to 12 pieces that start small—less than .25” wide—and go up to about 1.3” for wedgeshaped nuts and 3.5” for six-sided hexes. These are “standard” sizes to look for when first building your rack. There are much smaller nuts, like RPs, and much larger ones, like hexes (see page 28 for more info on specialized passive pro). Because nuts cost much less than cams, it’s common to double up on the small sizes of the standard nut range for gear-intensive routes. Plus, it’s cheaper to leave nuts behind than cams if you have to build an emergency rappel anchor.

 

How-to-Place-a-Nut
Good nut (left): securely set in a constriction, oriented downward, with full width of both sides touching. Extended with a quickdraw. Bad nut (right): Sides sticking out of crack, set in fractured rock, and not extended.

How to rack ’em

Rack a standard set of 10 to 12 nuts on two carabiners, organized by size, and clipped to a gear loop on your harness or a shoulder sling. Don’t be tempted to cram them all on one biner—this will make it harder to find the piece you need, and if you drop this biner, you’ll lose all your nuts.

Before “the Nut” There Was “the Pebble”… and It Was Sketchy

How to place ’em

As with any removable protection, placing nuts takes practice. Work on technique with your feet on the ground at the base of a cliff or boulder, or practice slotting nuts on toprope. Follow trad routes as often as you can. This makes you a proficient cleaner, and you’ll see how a more experienced leader places all types of gear.

The five principles of placing passive protection

  1. Ensure good rock quality. Make sure the rock is solid with no loose blocks or flakes that could easily pull off under force. A nut placement is only as good as the rock surrounding it.
  2. Pay attention to the direction of pull. Place the nut so the cable is oriented in the direction it will be pulled if you fall. This depends on how high above the piece you are when you fall, but generally you can place nuts so the pull is mostly down and slightly out.
  3. Seek out good constrictions. Basically, nuts and hexes work by wedging into a tapered crack. Look for a crack that widens with height: Slot the nut into the wide part and wedge it down into the narrower section—this constriction will hold it in place. Avoid placements where the rock flares outward or downward, and beware of cracks that widen just below or behind your placement—if the nut shifts slightly, it could pop out of the wider spot.
  4. Make sure the nut has adequate surface contact. The more, the better. The nut should sit squarely in the crack.
  5. After making the placement, set it. Once you’re satisfied with the placement, set it in place. Clip a sling or quickdraw to the wire, and give the nut a gentle tug to make sure it doesn’t pop right out. (Pulling hard on a nut that pops immediately could cause you to lose your balance and fall.) Then deliver a sharp, downward pull, so it settles into the constriction. 6. Extend it. As you move above a nut, tension on the rope can pull up on the cable, possibly yanking the nut out of its placement. To minimize this danger, always clip a quickdraw or runner between the nut cable and the rope.

*It helps to remember #1 to #4 as the mnemonic RDCS: Running Dogs Chase Squirrels.

How to clean ’em

Observe how the nut was moved into its position, and then remove it in reverse. You might be able to gently push the nut up and out; if not, wiggle the cable to try to unseat it. If it’s still stuck, use a nut tool and tap the piece from below until it comes out of the crack. If possible, avoid yanking up on the cable, or you risk damaging the wires. If a nut seems hopelessly stuck, remember they are inexpensive to replace; don’t risk your safety to retrieve it.

Section divider

Part II. Advanced nut placement techniques

Opposed-Nuts-Placement-660
Use two pieces to protect horizontal cracks by slotting the nuts, and then connecting them with a sling under light tension.

Horizontal cracks. Sometimes you can place a nut in a horizontal fissure by poking it into the crack and moving it sideways into a constriction that will hold it in place no matter what direction the pull comes. However, more often a nut placement will only work in one direction along a horizontal crack (just as many nuts in vertical cracks only protect against a downward pull). You can still use a nut that will only hold a sideways pull by placing another nut in “opposition.”

Camming action. Hexes can sometimes be placed in parallel-sided horizontals, much like a cam, by orienting it so the cable or sling points up and out of the crack. If the cable comes under load, it will cam the sides of the hex against the rock and hold it in place.

Find good placements so the two nuts’ cables are oriented toward each other; in other words, they will hold pulls in roughly opposite directions. Now, connect the two nuts with a sling: Clip a sling to one nut with a carabiner, and then thread the end of the sling through a biner clipped to the other nut, back up through the two strands of webbing, and back through the carabiner on the second nut. Clip a biner or quickdraw to the end of the sling, pull it to tension the sling and hold the two nuts in place, and clip the end to the rope.

Thread ’em. The skinny wires on nuts can be fished through holes where no sling could ever fit. Thread the clipping end of the wire between limestone solution pockets or around chockstones wedged into a crack, and then clip a quickdraw to both ends of the cable for a natural piece of pro.

Stacking-Nuts-Placement
Fit two nuts together, one right side up, the other upside down, to create a placement when you’ve run out of larger nuts. Use a keeper sling in case the placement fails, and connect the sling to the rope.

Stack ’em. Say you’re completely out of cams and large nuts, and you desperately need a piece to protect the final move on the pitch. In some cases, you may be able to stack two smaller nuts by holding one upside down against one side of the crack, and then wedging the other one, right side up, between the first nut and the rock. Give a good tug to set the pieces, and thread or clip the upside down nut to the second nut so you won’t lose it if the placement fails. It doesn’t often work as the placement can be tricky, but when it does, it’s a lifesaver.

Don’t forget to…

  1. Pay attention to shape. Some nuts are curved, so one side is concave and one is convex. You want the nut’s taper and curve to match the rock’s shape, wrapping around bends or irregularities in the crack. Sometimes you can simply flip the nut to get a better placement.
  2. Consider all options. Tapered nuts can be placed sideways in a crack—broad side facing out, narrow sides against the rock— which gives you more options when you’re getting low on gear. However, such placements may be less stable than the “normal” position. Hexes have many placement options—keep experimenting to find the ideal position. Nuts only protect a downward force.
  3. Know when to use a cam. If there’s a chance of an upward pull or a sharp sideways force, consider a cam, which protects in all directions. At the start of a pitch, always place a solid piece of pro that will resist outward and upward pulls. This will prevent a rope from “zippering” out the gear if it comes under tension.
  4. Place gear from comfortable stances. Small pieces can be fussy. It can take more time to place a nut than a cam because you might have to try multiple sizes to wedge it just right. Get a solid stance before you start fiddling.
Section divider

Part III. Super(ish) advanced nutcraft

As you’ve probably sensed reading through sections one and two, the principles of nut placement are simple but mastering them is a never-ending process. Recognizing subtle constrictions in natural rock takes a trained eye, and maximizing surface contact is an art learned through experience. Here are a few more tricks and tips that will help you up your nut game.

Mix Brands. Every company’s nuts are slightly different in size, taper, curve, and the relationship between the wide and narrow sides. Getting a secure wedge—especially in small and near-parallel placements—is often a game of millimeters. Carrying nuts in a mix of brands will give you a nice range of the in-between sizes.

Double Up. Nuts are inherently less secure than cams, meaning they can and do fall out. Nothing feels worse than cruising past a well-protected crux, only to notice with alarm that your bomber nut came out and you’re 15 feet above your last piece. Hedge your bets by placing two (or more) nuts to protect a crux. This type of pro is lightweight, so you can carry more with little burden. Put them to use! Likewise, if you can’t find a single solid placement in a flare, consider placing two nuts in the same slot. Place a small one nestled in the back and a larger one wedged closer to the surface. The wire of the larger nut will help keep the smaller, deeper nut securely in place (fig. 1).

Figure 1
Fig. 1

When placed in horizontal cracks, nuts will usually resist a sideways pull from one direction, but they can be vulnerable from the other side. You can use long slings to create elaborate “opposition” setups like you see in textbooks, but it’s often possible to simply place complementary nuts side by side in the same crack, close enough to be clipped with the same biner (fig. 2). This system is quick, simple, and avoids adding an element, like a sling, to the chain.

Figure 2
Figure 2

Shape Matters. A curved nut fits differently with the curve facing right versus facing left, so try both. If a slot is plagued by obstructions or a partial flare, a nut placed sideways (that is, broad side facing out) may wedge in the sweet spot. Tapered or “offset” nuts are great for pin scars and flares, but don’t overlook opportunities to place them “backward,” with the wide side deeper in the crack.

Don’t dicker around. More often than not, the protection challenge is not about tinkering or trick gear. It’s about getting the right nut off your rack, in the rock, and clipped to your rope before you pump out. That’s the kind of nutting skill that’s most likely to improve your climbing. Here are a few tips to get pro in the rock fast. Eye the protection possibilities ahead and adjust your rack accordingly. If it’s a finger crack or wider, cams will usually go in faster. Get the right sizes up front. For thinner cracks, optimize your nuts. Sometimes a crack will have slots so obvious that you can guess the exact nut you’ll need next. Don’t wait until you’re hanging on for dear life to use this information!

If you usually carry your nuts on two biners, spread them out onto three or four—five nuts max to a biner—so you can get to the right size quickly. Always use biners with notchless noses for snag-free nut dispensing. Take the whole biner off your gear loop, slot the nut you need, return the nuts biner to your loop, and clip the placed nut with a quickdraw. For very strenuous sections, you can single-rack a pre-selected assortment of nuts on their own individual biners or quickdraws. Grab the right size, slam it in, and clip. This tactic has saved many an onsight.

Trick gear

Headpoint tactics. For “headpointing” projects on England’s gritstone and elsewhere, climbers sometimes file down aluminum or brass nuts to get just the right shape for an especially finicky placement. Rap down with a selection of nuts, a medium-toothed file, and a small plywood “workbench” fitted with slings for hanging. Then practice placements and adjust the gear as necessary.

Pitons. For a horizontal crack across the top of a thin flake, don’t use nuts. Try hand-placing a medium or long knifeblade piton. Seek a placement that sets to the hilt but doesn’t wobble, preferably in a wider spot to keep the pin from rotating.

Hooks. Hooks can provide pro on crackless faces where nothing else will work. They work on incut pockets and edges; the main problem with hooks is keeping them from falling off before you do. Duct tape or tensioned sling systems can be used to “secure” delicate placements.